Stormcure Protec FW-25

Versatile, Durable & Seamless Liquid Roofing System

Why Choose Protec FW-25?

The Protec FW-25 system is a versatile and highly durable liquid applied membrane that provides seamless waterproofing suitable for a wide range of refurbishment and new-build applications. Utilizing Stormcure’s unique hybrid polymer technology, Protec FW-25 is fully cold-applied, fast-curing, flexible and tough system that can be used for foot traffic with a range of anti-slip solutions.

Protec FW-25 forms excellent adhesion to a range of existing roof surfaces, making it an ideal choice for overlays requiring a rapid and economical solution. The system has a certified lifespan of at least 25 years and is supported by Stormcure’s trusted accredited system warranties.

Colors available

Light Gray

IRR White

Any RAL color available

Key Features

Ultra-Versatile Waterproofing Solution
Protec FW-25 is ideal for all types of flat roofs, walkways and terraces, inverted, green, brown and blue roofs.
Seamless Waterproof Membrane
Applied as a liquid, Protec FW-25 forms a seamless waterproof membrane with no joints, no welds and no weak points.
RapidCure Technology
Extremely fast application with cure times as low as 30mins.
Flexible and Tough Membrane
A unique flexible hybrid polymer waterproofing system with the optimum combination of flexibility and robustness.

Cold Applied Installation with Zero Risks from Hot Works
Unlike many traditional roofing materials that require open flame hot works to install, Protec FW-25 is fully cold applied meaning there are no risks of accidental fire during installation.
Ideal for Overlays or New Roofs
Protec FW-25 can be applied to existing flat roof membranes for a lasting refurbishment solution and is equally suitable for new roof constructions.
Fire Performance
Can achieve classification of being tested by UL to standard 790 for fire performance, the top rating achievable for a flat roof system and designating Protec as unrestricted under the national requirements.

Applications

Stormcure’s liquid applied membranes provide an

ideal waterproofing solution for a range of applications, including:

Can be applied directly to a wide range of existing roof coverings including built-up roofing felt / mineral cap sheets, asphalt, single-ply membranes, concrete and liquid applied coatings.

Can be applied directly to Stormcure SA Carrier Layer over new rigid ISO insulation or timber decks

Available with a range of anti-slip finishes for trafficked areas.

Ideal for use as part of a warm, cold, green or inverted roof design.

Protec FW-25 Ready Reckoner

Depending on the type, toughness and porosity of the surface to be coated, the priming requirements and amount of material required can vary. The table below outlines suitable substrates, primers and typical coverage rates.

Adhesion tests may be required for certain substrates to confirm preparation & priming requirements. All rates are indicative only and subject to confirmation of the project site.