Simulated Metal Roof

Project Size:
1,700
ft²
Project Type:
New Construction
Sector:
Residential
System Installed:
Protec FW-25 & GRP Trims
Simulated Metal Roof

Simulated Metal Roof

A new addition to a historic residence required a roofing solution that combined contemporary styling with the character of the original property. Covering approximately 1,700 ft², the roof needed to recreate the appearance of standing seam metal while remaining within a strict budget. Stormcure’s Protec FW-25 system with simulated metal profile trims delivered the desired finish, combining lightweight, seamless waterproofing with an anthracite gray color to match the property’s windows.

Explore the potential of Stormcure’s Protec FW-25 System >

Project Challenges

The homeowners initially considered a traditional standing seam metal roof to achieve the clean lines and modern appearance envisioned for their new addition. However, balancing this design with the available budget required a more economical solution.

The chosen system needed to complement the existing building while providing durable protection against the elements. Weight, wind resistance, and long-term waterproofing performance were also key considerations.

Stormcure’s simulated metal finish offered the visual appeal of metal roofing with the benefits of a fully bonded, reinforced liquid-applied membrane. The ability to specify a RAL color allowed the roof to coordinate with the existing windows, while materials with no scrap value helped reduce the risk of theft.

The Stormcure Solution

Protec FW-25 was selected alongside Stormcure’s preformed GRP standing seam profile trims to create a roof that met the project’s aesthetic, performance, and budget requirements.

The roofing build-up included:

  • An insulated wood roof deck.
  • Simulated metal GRP standing seam profile trims installed at 2 ft centers.
  • A fully reinforced Protec FW-25 base coat encapsulating the roof and profile trims.
  • A Protec FW-25 finishing coat pigmented to RAL 7016 anthracite gray.

The profile trims were secured to the deck to establish the distinctive standing seam appearance. The reinforced base coat was then applied continuously across the roof and over the trims, incorporating them into a seamless waterproofing membrane.

This approach achieved the defined lines of a metal roof while maintaining continuous waterproofing across the surface. The fully bonded system also supported wind resistance, with the lightweight construction offering greater design flexibility.

Once the base coat had cured, the surface was carefully sanded to create a smooth finish. A second coat of Protec FW-25, tinted to RAL 7016 anthracite gray, was then applied across the entire roof, completing the simulated metal appearance and coordinating with the property’s windows.

The homeowners were delighted with the completed roof, which delivered their original design vision within budget. The installation combined a striking architectural finish with durable, fully reinforced waterproofing for long-term protection.

Reflecting the quality of the workmanship and finished result, the project went on to secure first place at the Roofing Awards in the projects under $25,000 category.

Stormcure — standing seam style with seamless waterproofing protection.

More Case Studies